11
●
Turn off the driver power in the event of a power
failure, otherwise the motor may suddenly start
when the power is restored and may cause
injury or damage to equipment.
●
Do not turn the C.OFF (current-off ) input to ON
while the motor is operating. If the input is
turned ON, the motor will stop and lose its
holding capability, causing possible injury or
equipment damage.
●
Do not repair, disassemble or modify the driver.
Doing so may result in fire or injury.
●
Do not use the motor and driver beyond their
specifications. Doing so may result in injury or
equipment damage.
●
Do not touch the motor or driver’s heat sink
while the driver is conducting current. Doing so
may result in burns.
●
Do not hold the motor by the output shaft or
cable. Doing so may result in injury.
●
Use the motor and driver only in the specified
combination. Failure to do so may result in fire
or equipment damage.
●
Provide an emergency-stop device or
emergency-stop circuit external to the equipment
so that the entire equipment will operate safely
in the event of a system failure or malfunction.
Failure to do so may result in injury.
●
Turn on the power to the driver after making sure
all control inputs of the driver are turned OFF.
Failure to do so may cause the motor to start
accidentally, resulting in injury or equipment
damage.
●
If the motor’s output shaft must be moved
directly by hand (for manual alignment, etc.), do
so after confirming that the driver’s C.OFF
(current-off ) input is ON. Failure to do so may
result in injury.
●
Do not touch the rotating part of the motor
(output shaft ) during operation. Doing so may
result in injury.
●
Immediately when trouble has occurred, stop
running and turn off the driver power. Failure to
do so may result in fire or injury.
●
When disposing of the motor and driver, treat
them as ordinary industrial waste. Engage a
certified waste-disposal service to carry out the
disposal.
Operation
Repair, disassembly and modification
General
Transportation
Operation
Disposal
Caution
●
Do not place flammable objects near the motor
or driver. Doing so may result in fire or burns.
●
Do not place objects near the motor or driver
that may prevent proper ventilation. Doing so
may result in equipment damage.
●
Provide a cover for the rotating part of the motor
(output shaft). Failure to do so may result in
injury.
Installation