16
Installing a load
When installing a load to the motor, align the
centerlines of the motor’s output shaft and load
shaft.
An optional flexible coupling (sold separately) may
be used.
●
Direct connection via a coupling
The centerline of the motor’s output shaft and that
of the load shaft must form a single line.
●
Belt connection
The motor’s output shaft and load shaft must be
parallel with each other, with the shafts forming
right angles with the line connecting the centers of
two pulleys.
●
Gear connection
The motor’s output shaft and gear shaft must be
parallel with each other, with the gear teeth
engaging correctly.
●
When connecting the motor’s output shaft with a
load, pay attention to the center alignment, belt
tension, parallelism of the pulleys, etc. Securely
tighten the coupling and pulley-tightening
screws.
●
Use caution so as not to damage the output
shaft or bearing when installing a coupling or
pulleys to the motor’s output shaft.
●
Do not modify or machine the motor’s output
shaft. Doing so may damage the bearing,
resulting in a failed motor.
NOTE