Orflo MOXI GO Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 50

Orflo MOXI GO Скачать руководство пользователя страница 40

Moxi GO™ User Guide

Page 36

Updating the Firmware

The firmware can be updated through a USB connection. Generic update instructions are
provided below. Specific instructions for the latest version of software will be included in the
release notes for that version, which can be found along with the Software/Firmware download.
For updates, the user must connect to a computer’s USB port via the provided USB cable.

1. Download and extract the firmware update files (provided as a .zip file). The number

and file names can vary with each firmware update. Typical files included with the
update include: MANIFEST.TXT, moxiprog.hex, runonce.sh, and KERNEL.COF. Note
the location of the files for later use.

2. Turn off the instrument by pressing the power button.
3. Unplug the power adapter to expose the USB connector for the computer. Plug the Moxi

GO™ into the computer that has the downloaded firmware update files.

4. Next, the user needs to put the instrument into a firmware update mode. This can be

done in either of the following two ways:

a. With the unit powered off, quickly press the

power/reset button five times (reminder:  the unit
needs to be in the off position to start this
process).  When successful, the screen will
display with text under the ORFLO logo that
indicates that the system has entered the
“ORFLO Load” (see image to the right/top).  If
unsuccessful, turn the power off and retry.

b. From the

Apps

screen (off of the

Home

screen)

press the

Loader

app icon

5. The Moxi GO™ will show up as an external drive on the

computer (on Mac use the Finder, on PCs use the
Windows Explorer to see it).

6. Drag all extracted files onto the Moxi GO drive. The

Moxi GO™ screen will update to show a “USB File
Transfer” message with an

OK

(see image right/bottom).

7. Once the file copy has completed, safe-eject the disk

from your computer.

8. Touch the

OK

button to proceed. The unit will then load

the new firmware (showing a status bar) and
automatically power-off.

9. The firmware update is now complete. Unplug the unit

from the computer and plug it back into the AC adapter. The unit has been updated and
is now ready for use.

«
...
38
39
40
41
42
...
»

Содержание MOXI GO



















































Отзывы:

Нет отзывов