
Moxi GO™ User Guide
Page 11
•
Cell or bead sample, previously prepared according to reagent or assay kit instructions
(diluted and dissociated, if necessary); 75
µ
L minimum needed per test.
•
MFS Cassettes
•
Pipette and appropriately sized pipette tips
General Instructions for Running a Test (All Applications)
The following represent a hi-level overview of the steps when running any application on the
Moxi GO™.
1. Turn the instrument on by pressing the power button and the
Home
screen will be
displayed.
NOTE
The instrument must be plugged into an electrical outlet (AC) in order to
power the laser and run an application.
2. Select an application by pressing one of the icons displayed on the screen. Basic
instructions, such as loading a cassette, are then presented in the following screens of
the application.
3. Open the Cassette Tray Door and depress the Cassette Tray
Lever. Slide a cassette, with ORFLO lettering-side up, into the
cassette tray (either end 1 or 2). Release the Cassette Tray
Lever and close the Door.
Note
Should this result in an error make sure that (a) your
cassette is pushed into the cassette tray completely such that it
locks into place; (b) you are using a new cassette, or unused
side of a cassette.
4. The Moxi GO™ will automatically perform a calibration sequence, as outlined in the
images below, to align the laser to the cassette flow cell. This occurs for all tests except
“Size Histogram”. When complete the system prompts the user to open the Cassette
Tray Door and load sample.
NOTE
System status messages and commands, such as “Aligning the laser” are
displayed in the black bar at the top of the screen.
NOTE
For the first test run, following power up, an initial system calibration is performed
(“System Calibration” in image above/left). Following that initial test, only the standard
laser alignment (images to above/middle and above/right) is performed.
5.
System messages at the top of the screen prompt the user to “Open the Door” (image
Содержание MOXI GO
Страница 1: ...For Research Use Only Not For Use In Diagnostic or Therapeutic Procedures Moxi GO USER GUIDE...
Страница 21: ...Moxi GO User Guide Page 17...
Страница 23: ...Moxi GO User Guide Page 19 Histograms...
Страница 30: ...Moxi GO User Guide Page 26 Changing Display Axis for Analysis PMT vs Size Histogram Only Views...