Oracle X4-2B, Руководство по установке

Страница: 85 / 118

▼
Configure Preinstalled Oracle VM Server
These instructions describe how to configure only the preinstalled Oracle VM Server on your
server module. Oracle VM also has other components, such as Oracle VM Manager, that must
be installed or already up and running to support the virtual machine environment.
Gather the necessary organizational and network environment information needed to
configure the software. See
“Oracle VM Server Configuration Worksheet” on page 84 .
Log in to the server module's Oracle ILOM.
Skip this step if you are already logged in to the server module's Oracle ILOM.
Choose one of the following methods:
■
Remotely from an Ethernet connection
See “Set Up Server Module Remote Using Ethernet Network Connection” on page 38 .
■
Locally from a direct serial connection
See “Set Up Server Module Using Local Serial Connection” on page 40 .
Start the host console.
Choose one of the following methods:
■ Oracle ILOM web interface:
a. Click Remote Control > Launch Remote Console.
b. Wait while the server boots, and the GRUB menu appears.
■
Oracle ILOM CLI:
a. Type:
-> start /HOST/console
b. When prompted, type
y
to confirm:
Are you sure you want to start /HOST/console (y/n)? y
Serial console started.
c. Wait while the server boots, and the GRUB menu appears.
d. Press the up or down arrow to pause at this menu.
Before You Begin
1
2
Oracle VM Server Configuration Worksheet
85