Oracle X4-2B, Руководство по установке

Страница: 59 / 118

5. Set up Server Module Software and Firmware (Oracle
System Assistant)
This section describes how to set up Sun Blade X4-2B server module software and firmware
using Oracle System Assistant. Oracle System Assistant is the easiest method for setting up your
server module software and firmware.
Use Oracle System Assistant to set up software and firmware as shown in the following table.
Task Link
Launch Oracle System Assistant from Oracle ILOM or
locally. “Accessing Oracle System Assistant” on page 59
Use Oracle System Assistant to perform common
setup tasks. “Set Up Software and Firmware (Oracle System
Assistant)” on page 62
Refer to the Oracle X4 Series Server Administration Guide for additional setup procedures if:
■
Oracle System Assistant is not embedded on your server module,
■
You prefer to use Oracle ILOM for system set up,
■
You prefer to use Oracle Hardware Management Pack for system set up,
Accessing Oracle System Assistant
Choose a method to access Oracle System Assistant on a server module, as described in the
following sections:
■
“Launch Oracle System Assistant (Oracle ILOM)” on page 59
■
“Launch Oracle System Assistant (Locally)” on page 61
▼
Launch Oracle System Assistant (Oracle ILOM)
To launch Oracle System Assistant, using Oracle ILOM, from a remote or local location:
Ensure that the server module is in standby power mode.
In server module standby mode, the Power/OK LED blinks slowly.
Verify that the Power/OK LED blinks slowly. See: “Front Panel Features” on page 10 .
Log in to the server module SP Oracle ILOM web interface.
See “Log In to Oracle ILOM SP (Web Interface) ” on page 52 .
1
2
Accessing Oracle System Assistant
59