Oracle X4-2B, Руководство по установке

Страница: 31 / 118

After the server product page appears, click
Full Components List
.
A list of supported components displays.
Install supported components.
For component installation instructions, refer to the service label on the Sun Blade X4-2B top
cover or the
Sun Blade X4-2B Service Manual .
▼
Prepare the Site and Chassis
To prepare to install the Sun Blade X4-2B server module in a supported Sun Blade 6000
modular system chassis.
Confirm that the Sun Blade 6000 modular system chassis is ready to receive the server module.
A blank slot must be available.
See “Specifications” on page 12 , Sun Blade X4-2B Physical Specifications.
Confirm that the physical site is ready to receive the server module.
See “Specifications” on page 12 , Sun Blade X4-2B Environmental Specifications.
Confirm that the power requirements are met.
The chassis must have sufficient reserve power to add the new server module to the chassis
power load. See
“Troubleshooting Server Power States” on page 111 .
See “Specifications” on page 12 , Sun Blade X4-2B Electrical Specifications.
Verify that the network express modules (NEMs) that are supported for use with the Sun Blade
X4-2B have been installed in the chassis.
For more information about supported components such as NEMs, refer to Sun Blade X4-2B
Product Notes at
http://www.oracle.com/goto/X4-2B/docs
.
Ensure that the Sun Blade 6000 modular system chassis in which you will install the server
module is operating with no faults.
Verify the following:
a. The chassis NEMs are operating without faults.
b. Amber service LEDs are not illuminated on any chassis component.
c. All required power cables to the chassis are attached.
4
5
1
2
3
4
5
Install Optional Components
31