Oracle X4-2B, Руководство по установке

Страница: 15 / 118

Feature Description Link
Rear panel ports Two internal USB 2.0 ports with rear panel access.
One internal USB port might be preinstalled with a
USB drive containing Oracle System Assistant.
Oracle System Assistant USB stick is installed on
server module USB drive port 0, in a standard
configuration.
“5. Set up Server Module
Software and Firmware
(Oracle System
Assistant)” on page 59
Refer to this section for
information about setting
up the server module
using Oracle System
Assistant.
http://www.oracle.com/
goto/x86AdminDiag/docs
Refer to this library for
more information about
Oracle System Assistant.
“Supported Components”
on page 13
Refer to this
section for more
information about USB
drive ports.
Front panel ports Two USB 2.0 ports.
A universal connector port (UCP) connects to a
multi-port cable.
“About Front and Rear
Panels” in
Sun Blade
X4-2B Service Manual
Multi-port cable Each Sun Blade 6000 series chassis is typically
shipped with a multi-port cable. The multi-port cable
enables you to connect communication devices
directly to the Sun Blade X4-2B. The multi-port cable
provides the following interface connections to the
front panel UCP:
■
VGA graphics port (2D embedded graphics
controller)
■ RJ-45 serial management port
■
Two USB ports (keyboard, mouse, USB drive)
http://www.oracle.com/
goto/SB6000/docs
Network express module
(NEM) compatibility Both 10 GbE and 1 GbE NEM interfaces are
supported.
Note –
The procedures in this guide do not cover
cabling of PCIe ExpressModules (PCIe EMs) or
network express modules (NEMs) installed in the
chassis and connected to the server module through
the chassis midplane. Refer to the chassis, PCIe EM,
or NEM documentation for instructions on cabling
these components.
Sun Blade X4-2B Product
Notes
for details on
supported NEMs.
http://www.oracle.com/
goto/SB6000/docs
Supported Components
15