Oracle X4-2B, Руководство по установке

Страница: 112 / 118

■
Review the Oracle ILOM event log messages to determine whether the server module has
permission to power on. An event message is recorded in the log any time there is
inadequate amount of power available from the chassis PSUs to power on a server module.
For more information about the Oracle ILOM event log or monitoring power consumption,
refer to the Oracle Integrated Lights Out Manager (ILOM) 3.1 documentation library.
http://www.oracle.com/goto/ILOM/docs
■
Ensure that the chassis has the proper number of power supplies installed to support
powering on all the chassis components that are currently installed.
Refer to the system chassis documentation for information about the number of power
supplies required to power on chassis components, see
www.oracle.com/goto/SB6000/
docs
.
■
To avoid power loss, use the default CMM power management settings in Oracle ILOM for
power supplies.
For more information about power management, refer to the Oracle ILOM 3.1
documentation.
Note –
When power-on permissions become available, the OK/Power LED on the front
panel of the server module illuminates a standby blink.
■
As needed, refer to
http://www.oracle.com/goto/x86AdminDiag/docs
for instructions on
how to run start up diagnostic tools provided with the server module.
Related Information
■ www.oracle.com/goto/SB6000/docs
Technical Support Information Worksheet
If the troubleshooting information fails to solve your problem, use the following table to collect
information that you might need to communicate to the support personnel.
System Configuration Information Needed Your Information
Service contract number
System model
Operating system
System serial number
Peripherals attached to the system
Technical Support Information Worksheet
Sun Blade X4-2B Installation Guide • March 2014 112