Oracle X4-2B, Руководство по установке

Страница: 50 / 118

■
Connected to the network through the Ethernet management port.
■
Configured
■
Operational
■
If the chassis Oracle ILOM CMM is not working correctly, refer to the chassis documentation
at
http://www.oracle.com/goto/SB6000/docs
.
Open a terminal window.
Log in to the chassis Oracle ILOM CMM using a Secure Shell (SSH) session.
For example, type:
$ ssh
username
@
CMMIPaddress
where username is a user account with Administrator privileges and the CMMIPaddress is the
IP address of the Oracle ILOM CMM. The default Oracle ILOM Administrator account user
name is
root
.
■
If this default Administrator account has been changed, contact your system administrator
for an Oracle ILOM user account with Administrator privileges.
Note –
To enable first-time login and access to Oracle ILOM, a default Administrator
account and its password are provided with the system. To build a secure environment, you
must change the default password (changeme) for the default Administrator account (root)
after your initial login to Oracle ILOM. If this default Administrator account has since been
changed, contact your system administrator for an Oracle ILOM user account with
Administrator privileges.
After successful log in to Oracle ILOM CMM, the Oracle ILOM prompt (
->
) appears.
Type:
-> show /CH/BL0/SP/network
where
BL0
represents a Sun Blade X4-2B slot 0 in the chassis.
Oracle ILOM CMM displays properties of the server module, including its IP address and MAC
address. The following example shows blade 0 server module information:
-> show /CH/BL0/SP/network
/CH/BL0/SP/network
Targets:
interconnect
ipv6
test
Properties:
commitpending = (Cannot show property)
dhcp_server_ip = 10.134.210.11
ipaddress = 10.134.210.152
2
3
4
Determining Server Module Oracle ILOM SP IP Address
Sun Blade X4-2B Installation Guide • March 2014 50