Oracle Sun Fire X4240, Руководство по обслуживанию

Страница: 95 / 190

Chapter 4 Servicing Motherboard Components 4-33
2. At the prompt, enter the
servicetool
command with options. The options are
defined in the table below.
# servicetool --fru_update=serviceprocessor
<OtherOptions>=
<value>
3. Watch the output from the command and respond to the confirmation prompts
for continuing the update and rebooting the server:
Servicetool is going to collect system information for the service
processor for future part swaps.
The following preconditions must be true for this to work:
* The new service processor must be installed.
Do you want to continue (y|n)? y
Service processor FRU information ready to be collected.
You MUST reboot the service processor for to complete
this process. Allow the service processor to fully boot.
DO NOT UNPLUG THE SYSTEM WHILE THE SERVICE PROCESSOR IS BOOTING!
Would you like to reboot the service processor now (y|n)? y
The system is going down NOW!!
Sending SIGTERM to all processes.
Option Description
--board_replaced=BOARD
Update FRU information for BOARD after it has
been replaced. BOARD represents one of the
following parameters:
• mainboard
• pdb
--fru_product_part_number
Write a new product part number to mainboard and
pdb FRUs.
--fru_product_serial_number
Write a new product serial number to mainboard
and pdb FRUs.
--fru_chassis_serial_number
Write a new chassis serial number to mainboard
and pdb FRUs.
--fru_chassis_part_number
Write a new chassis part number to mainboard
and pdb FRUs.
--fru_asset_tag
Write a new asset tag to mainboard and pdb
FRUs.