Oracle Sun Fire X4240, Руководство по обслуживанию

Страница: 55 / 190

Chapter 3 Servicing Customer-Replaceable Devices 3-15
3.4 Servicing Power Supplies
Some versions of the Sun Fire X4240 are equipped with redundant hot-swappable
power supplies. Redundant power supplies enable you to remove and replace a
power supply without shutting the server down, provided that the other power
supply is online and working.
If a power supply fails and you do not have a replacement available, leave the failed
power supply installed to ensure proper air flow in the server.
See Section 3.4.2, “Power Supply LED Reference” on page 3-15 for specific
information about power supply status LEDs.
The following topics are covered:
■
Section 3.4.1, “Detecting Power Supply Failure” on page 3-15
■
Section 3.4.2, “Power Supply LED Reference” on page 3-15
■
Section 3.4.3, “Removing a Power Supply” on page 3-16
■
Section 3.4.4, “Installing a Power Supply” on page 3-18
Note –
CRU
: This customer replaceable unit can be replaced by anyone.
3.4.1 Detecting Power Supply Failure
The following LEDs are lit when a power supply fault is detected:
■
Front and rear Service Required LEDs
■
Rear PS Failure LED on the bezel of the server
■
Failure LED on the faulty power supply
See Section 3.4.2, “Power Supply LED Reference” on page 3-15 for power supply LED
information. See Section 1.3, “Sun Fire X4240 Front Panel Features” on page 1-8 and
Section 1.4, “Sun Fire X4240 Rear Panel Features” on page 1-9 for more information
about identifying and interpreting system LEDs.
3.4.2 Power Supply LED Reference
Each power supply contains a series of LEDs on the rear panel of the system.