CISCO SWITCH Ver7.59
Device detected on 0:1:2 after 0 msecs
...
7.
Switch to normal setup and, when asked if you want to enforce secure password
standard, enter
no
, then enter a new password for the
admin
user.
Running S93thirdparty-script...
Populating conf files for hybrid sysmgr ...
Starting hybrid sysmgr ...
inserting /isan/lib/modules/klm_cisco_nb.o ... done
Abort Auto Provisioning and continue with normal setup ? (yes/no) [n]: yes
---- System Admin Account Setup ----
Do you want to enforce secure password standard (yes/no) [y]: no
Enter the password for "admin":
Confirm the password for "admin":
8.
When the Basic System Configuration Dialog appears, choose to enter the basic
configuration dialog.
---- Basic System Configuration Dialog VDC: 1 ----
This setup utility will guide you through the basic configuration of
the system. Setup configures only enough connectivity for management
of the system.
Please register Cisco Nexus9000 Family devices promptly with your
supplier. Failure to register may affect response times for initial
service calls. Nexus9000 devices must be registered to receive
entitled support services.
Press Enter at anytime to skip a dialog. Use ctrl-c at anytime
to skip the remaining dialogs.
Would you like to enter the basic configuration dialog (yes/no): yes
9.
In the basic configuration, you can use the default inputs until asked to enter the
switch name.
In this example, the switch has a name of
test123sw-adm0
.
Create another login account (yes/no) [n]:
Configure read-only SNMP community string (yes/no) [n]:
Configure read-write SNMP community string (yes/no) [n]:
Enter the switch name : test123sw-adm0
10.
Respond
no
when asked to configure Out-of-band management configuration.
Continue with Out-of-band (mgmt0) management configuration? (yes/no) [y]: no
11.
Respond
yes
when asked to configure advanced IP options.
Configure advanced IP options? (yes/no) [n]: yes
12.
Respond
no
when asked to configure static route (this will be configured later).
Configure static route? (yes/no) [n]: no
Chapter 5
Configuring the Cisco Ethernet Switch
5-15
