PULSAR Minimal Stress
Installation and operating Manual
OPTIKON 2000
Cod. 111001EN
2012-02-16 Rev.J
3-2
the unit off and on), the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the other devices.
•
Increase the distance between the equipment.
•
Connect the unit into an outlet on a circuit different from that to which the
other devices are connected.
•
Consult your local distributor or OPTIKON 2000 technical assistance
Environmental warnings
•
The system should never be used in the presence of flammable anaesthetics,
disinfecting agents, cleaning agents, etc., due to possible fires or explosion.
•
The use of flammable anaesthetics (N
2
O), (O
2
), should be avoided unless they
are removed by a gas aspiration system.
•
To ensure safe operation, do not install the system in a location where it may
be exposed to heating appliances or radiators, direct sunlight or any other
source of heat with extremely high temperatures.
•
Install the PULSAR system so that the ventilation openings are not obstructed.
•
Dispose waste collection fluids according to the local laws/regulations on
disposal of organic materials.
•
Do not dispose of the “PULSAR” unit as unsorted municipal waste. Dispose of
it separately according to local electrical and electronic equipment disposal
laws/regulations.
Electrical warnings
•
The unit is already set up for use with a power supply voltage of 220V. Check
that the local voltage is the same as that predetermined on the unit.
Otherwise, prepare the unit for the local power supply voltage. In the
countries where the local voltage is 100 - 120 V, replace the fuses of the unit
with the appropriate fuses supplied. These operations must be carried out
exclusively by appropriately trained personnel.
•
To reduce the risk of electric shocks, do not remove the protective cover.
Request the intervention of authorised service personnel.
•
Connect the console of the PULSAR unit to a mains having the characteristics
shown on the console’s rear panel. To guarantee safety, a hospital grade
power cord and plug must be used, the unit must be grounded.
