Omron Z300 V3 - SETUP, Руководство по установке, Страница: 6 / 98

5
About this Manual:
This manual describes the hardware for the Z300 (High-precision Visual Displacement Measure-
ment System) and how to install the components, and it includes the sections described below.
This is one of two manuals used to operate the Z300. Refer to the following table for the contents of
each manual.
Please read the above manuals carefully and be sure you understand the information provided
before attempting to install or operate the Z300.
Section 1 Features introduces the features of the Z300.
Section 2 Wiring and Connection describes procedures for wiring power supplies and ground
wires and for connecting to external devices.
Section 3 Installation provides installation methods for the Controller and Sensor.
Section 4 Non-visual Mode explains how to make settings for Z300 operation using the DIP
switch instead of the menus.
Section 5 Maintenance explains maintenance procedures for ensuring the Z300's performance.
Section 6 Troubleshooting provides information on hardware errors that may occur with the
Z300. Refer to this section before requesting service from your OMRON representative.
Section 7 Specifications and Dimensions provides the specifications and dimensions of the
Z300 and its peripheral devices.
Manual Contents Cat. No.
1: Setup Manual Provides information on system hardware and instal-
lation. Be sure to read this manual first.
Z161
2: Operation Manual Describes operation of the Z300. Z162
WARNING
Failure to read and understand the information provided in this manual may
result in personal injury or death, damage to the product, or product failure.
Please read each section in its entirety and be sure you understand the informa-
tion provided in the section and related sections before attempting any of the pro-
cedures or operations given.