Omron Z300 V3 - SETUP, Руководство по установке, Страница: 18 / 98

17
Ambient Temperature
- Maintain a minimum clearance of 50 mm above and below the Z300 to
improve air circulation.
- Do not install the Z300 immediately above significant heat sources, such as
heaters, transformers, or large-capacity resistors.
- Do not let the ambient temperature exceed 50
°
C.
- Provide a forced-air fan cooling or air conditioning if the ambient tempera-
ture is near 50
°
C so that the ambient temperature never exceed 50
°
C.
Ambient Illumination
Although the Z300 is rated for use in environments where the ambient illumina-
tion does not exceed 3000lx, if possible, do not use the Z300 near lighting equip-
ment that turns ON and OFF continuously. If this is unavoidable, reduce the
influence of the light by, for example, using a light baffle.
Noise Resistance
- Do not install the Z300 in a cabinet containing high-voltage equipment.
- Do not install the Z300 within 200 mm of power cables.
Sensor Maintenance
- Install the Sensor in a clean environment and keep the filter on the front panel
of the Sensor free from oil and dust. If affected by oil or dust, clean the filter as
follows:
1. Use a blower brush (used to clean camera lenses) to blow large dust parti-
cles from the surface. Do not blow the dust away with your mouth.
2. Use a soft cloth (for lenses) with a small amount of alcohol to remove the
remaining dust. Do not use a scrubbing action when cleaning as scratches
on the filter could result in the Sensor malfunctioning.
Environment
The Sensor cannot accurately detect the following types of objects:
- Objects with an extremely low reflection ratio
- Objects with a small curvature
- Largely inclined objects
Connecting Cables
Always turn OFF the Z300's power before connecting or disconnecting cable.
Control panel
Z300
Louver
Z300
200 mm min.
200 mm min.
Power cable
PRECAUTIONS