Omron Z300 V3 - SETUP, Руководство по установке, Страница: 20 / 98

19
Warming Up
After turning ON the power supply, allow the Z300 to stand for at least 30 min-
utes before use. The circuits are unstable immediately after the power supply is
turned ON and attempting measurement may result in inconsistent measure-
ment values.
Check the contents of the package as soon as you receive the Z300. It is extremely rare for compo-
nents to be missing, but contact the nearest OMRON representative if any of the following items are
missing.
1. Z300-VC10EV3 Controller Qty: 1
2. SETUP MANUAL (This Manual) Qty: 1
3. OPERATION MANUAL Qty: 1
Some of the products listed may not be available in some countries. Please contact your nearest
OMRON sales office by referring to the addresses provided at the back of this manual.
The following headings appear in the left column of the manual to help you locate different types of
information.
Note
Indicates information of particular interest for efficient and convenient operation
of the product.
Notice
Indicates information required to take full advantage of the functions and perfor-
mance of the product. Incorrect application methods may result in the loss of
damage or damage to the product. Read and follow all precautionary informa-
tion.
CHECK
Indicates points that are important in using product functions or in application
procedures.
1,2,3...
Indicates lists of one sort or another, such as procedures, checklists, etc.
SeeAlso
Indicates where to find related information.
Screen Messages In this manual, screen message are given in bold/italic.
E.g.: Application
Confirming Package Contents
Product Availability
Visual Aids
Notation
PRECAUTIONS