Omron Z300 V3 - SETUP, Руководство по установке, Страница: 24 / 98

23
1-2 Simple Setup Using Menus!
Set the measurement conditions on the Console according to the menus dis-
played on the monitor screen. The Z300 has 2 types of menu.
First, try out the Application Menu .
Measurement conditions for a representative application are already set and so
setting can be performed simply by selecting the measurement items.
Refer to page 28 in the Operation Manual.
Use the Expert Menu to set different measurement conditions from the preset
ones, or to add more detailed settings to the Application Menu settings.
Refer to page 43 in the Operation Manual.
Application
Sf displace
Spot displace
Max. height
Groove/dent
Step
Transp thick
Step(2sensor)
Thik(2sensor)
Select the application
ENT:Next ESC:Back
Select from these items.
The Z300 is factory-set to
perform surface displace-
ment measurement when
the power supply is turned
ON.
Scn0
SET
Point/Equation
Conditions
Hold
Avg/Filter
Details
Select the item
to be set.
Simple Setup Using Menus! Section 1-2