Omron V530-R150, Руководство по эксплуатации

Страница: 65 / 197

4-3 Section Trigger Inputs and Output Format
54
Read
Begin read
d
Bit
Setting eg ead
word
15 to 12 11 to 8 7 to 4 3 to 0
Se g
+0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1 Command code
Stops continuous reading.
Read
Begin read
d
Bit
Setting eg ead
word
15 to 12 11 to 8 7 to 4 3 to 0
Se g
+0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 Command code
Reading Judgment
Write
Begin write word Bit eg e o d
15 to 12 11 to 8 7 to 4 3 to 0
+0 Write flag 0 0 0 0 0 0 0 0 0 0 0 0
+1 Reading data 1st byte Reading data 2nd byte
+2 Reading data 3rd byte Reading data 4th byte
to to to
+27 Reading data 53th byte Reading data 54th byte
+28 Reading data 55th byte Reading data 56th byte
•
Reading data is stored with ASCII codes.
•
Write flag switches between [0 0 0 0]
←→
[1 1 1 1] each time
data is output. Monitor the flag to see whether reading judg-
ment has been written.
•
The data capacity (max.) of codes is as follows.
Letters and numbers: 56 letters
The reading data after 56th letter are ignored.
•
When reading is NG, error codes are output to word +1.
•
When the byte of reading data is an odd number, a space
(ASCII code 20) is inserted in 0 to 7th byte.
Switch the Scene (20) 1:1 Connection
Specify the scene number to be switched.
Read
Begin read
d
Bit Setting eg ead
word
15 to 12 11 to 8 7 to 4 3 to 0
Se g
+0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 Command code
+1 – – – – – – – – – – – – Scene No. Scene number (0 to 9)