Omron V440-F, Руководство пользователя

Страница: 345 / 500

Appendices
H-10 V440-F C-Mount Code Reader User Manual
This is the default mode of operation in which the programmable output is activated when the
Output
On
condition has been met and held active for the duration of the selected pulse width.
The programmable output is activated when the
Output On
condition has been met and held active
until the opposite condition selected under
Output On
has been met.
For example, if
No-Read
is enabled under
Output On
, the programmable output will go active on a No-
Read and remain active until the opposite condition, a good read, occurs.
The programmable output is active when the Output On condition has been met and is held active until
a new read cycle begins.
• Note:
All of the
Output On
modes are inhibited when any
Output on Warning
is active for
Output 1
.
Diagnostic Warning
Usage: Typically used when a discrete indication of a diagnostic condition is needed.
Definition: Activates discrete output when a diagnostic warning condition is met,
depending on the diagnostic option enabled.
In Read Cycle
Definition: Activates a discrete output when the reader is in a read cycle.
H-6-1 Output State
Definition: Sets the active electrical state of the discrete output.
Serial Cmd: <
K810, output on, output state ,pulse width,output mode
>
Default: Normally Open
Options: 0 = Normally Open 1 = Normally Closed
H-6-2 Pulse Width
Definition: Sets the time in 1 ms increments that the discrete output remains active.
Serial Cmd: <
K810, output on,output state, pulse width ,output mode
>
Default: 500ms
Options: 0 to 65535(in 1 ms increments)
H-6-3 Output Mode
Definition: Sets the condition in which the discrete output is de-activated.
Serial Cmd: <
K810, output on,output state,pulse width, output mode
>
Default: Pulse
Options: 0 = Pulse
2 = Latch Mode 2
3 = Latch Mode 3
Pulse
Latch Mode 2 ( Unlatch Opposite Condition)
Latch Mode 3 ( Unlatch Re-enter Read Cycle)