![background image](http://html1.mh-extra.com/html/omron/sysdrive-3g3ev-series/sysdrive-3g3ev-series_user-manual_743233045.webp)
4-14
n04
Forward/Reverse Rotation Selection
Setting range
f%r
,
reU
Factory setting
f%r
(forward rota-
tion)
This constant is used to specify the direction of motor rotation when the Inverter is oper-
ated with the Digital Operator.
Value
Description
f%r
Forward rotation
reU
Reverse rotation
Note 1. While the Inverter is being operated with the Digital Operator, the direction of
motor rotation can be changed by lighting the F/R indicator with the Mode Key
first, pressing the Increment or Decrement Key to change the setting, then
pressing the Enter Key.
Note 2. The direction (forward/reverse) of motor rotation depends on the motor model
used. Refer to the instruction manual for the motor.
n06
Multi-Function Input Selection
Setting range
0 to 4
Factory setting 1
One of the following values can be selected for the multi-function input (S1) function:
Value
Description
0
Forward/reverse rotation command (3-wire sequence)
1
Fault reset (fault reset when ON)
2
External fault (contact a: external fault when ON)
3
External fault (contact b: external fault when OFF)
4
Multi-step speed command (frequency reference 2 when ON)
n09
Multi-Function Output Selection
Setting range
0, 1, 2
Factory setting 1
One of the following three values can be specified for the multi-function contact output
(MA and MB) function. When the Inverter enters the state corresponding to the specified
value, MA is turned on and MB is turned off.
Value
Description
0
Fault occurrence
1
Operation in progress (frequency reference is being output)
2
Frequency matching (see note)
Preparing for Operation
Chapter 4
Содержание SYSDRIVE 3G3EV SERIES
