![background image](http://html1.mh-extra.com/html/omron/sysdrive-3g3ev-series/sysdrive-3g3ev-series_user-manual_743233018.webp)
3-5
•
Install the Inverter in a clean location free from oil mist and dust. Alternatively, install it
in a totally enclosed panel that is completely shielded from suspended dust.
•
When installing or operating the Inverter, always take special care so that metal pow-
der, oil, water, or other foreign matter do not get in the Inverter.
•
Do not install the Inverter on inflammables such as wood.
H
Direction of Installation
•
Install the Inverter on a vertical surface so that the characters on the nameplate are
oriented upward.
H
Installation Space
•
When installing the Inverter, always provide the following installation space to allow
normal heat dissipation from the Inverter:
W= 30 mm min.
100 mm min.
100 mm min.
Air
Side
Air
Inverter
Inverter
Inverter
H
Ambient Temperature Control
•
To enhance operation reliability, the Inverter should be installed in an environment free
from extreme temperature rises.
•
If the Inverter is installed in an enclosed environment such as a box, use a cooling fan
or air conditioner to maintain the internal air temperature below 50
°
C.
•
The surface temperature of the Inverter may reach 30
°
C higher than the ambient tem-
perature. Therefore, keep all thermally susceptible devices and wires away from the
Inverter.
H
Protecting the Inverter from Foreign Matter during Installation
•
Place a cover over the Inverter to shield it from metal powder produced by drilling dur-
ing installation.
(Upon completion of installation, always remove the cover from the Inverter. Other-
wise, ventilation will be affected, causing the invert to overheat.)
Design
Chapter 3
Содержание SYSDRIVE 3G3EV SERIES
