![background image](http://html1.mh-extra.com/html/omron/smartslice-grt1-drt/smartslice-grt1-drt_operation-manual_742293289.webp)
269
GRT1-CP1-L Positioning Unit
Section 7-5
■
Preset Value
Set the
Preset value
Field to the desired preset value. The set value will be
stored in the Preset Value Register.
The following figure shows how the preset value works. In this example, a
fixed frequency is input from the encoder to the counter and the preset value
is set to 1000.
The preset value can be set to between –2,147,483,648 (8000 0000 hex) and
2,147,483,647 (7FFF FFFF hex).
This setting is stored in non-volatile memory. If the setting is changed, the
new value is effective immediately.
■
Default Settings
Press the
Default Setting
Button on the
Preset
Tab Page to set the following
default value.
Range 0 and Range 1 Tab
Pages
A Positioning Unit supports two comparison ranges, one for each digital out-
put. The tab page to set a comparison range is displayed only when the range
is enabled. Click the
Range 0
or
Range 1
Button on the
Positioning
Tab Page
to enable using the range and display the
Range 0
or
Range 1
Tab Page. The
digital output will not be controlled by the comparison function unless the cor-
responding range is set.
The Range 0 Tab Page is used to describe the functionality in this manual,
but the functionality is the same for range 1.
Note
The digital output will be controlled by the corresponding range only when the
Output 0 Control Bits (bits 12 and 13 of word n+2) or Output 1 Control Bits
(bits 14 and 15 of word n+2) are OFF.
Co
u
nter preset
Preset val
u
e = 1000
Co
u
nt
Time
Setting
Default value
Preset value
0
Содержание SMARTSLICE GRT1-DRT
