![background image](http://html1.mh-extra.com/html/omron/smartslice-grt1-drt/smartslice-grt1-drt_operation-manual_742293255.webp)
235
GRT1-CT1(-1) Counter Units
Section 7-4
7-4
GRT1-CT1(-1) Counter Units
This section describes the GRT1-CT1 and GRT1-CT1-1 Counter Units.
7-4-1
Specifications
General Specifications
Performance Specifications
Note
The response time is the time between the moment the A, B, Z, or IN input
turns ON or OFF and the moment the digital output is updated to the new
state. The specified response time may not be achieved during monitoring or
maintenance.
I/O Signal Specifications
The encoder A and B inputs are phase differential signals for counting. The
encoder Z input is a zero marker each revolution.
Inputs
Encoder A and B Inputs
Item
Specification
Unit power supply voltage
24 VDC (20.4 to 26.4 VDC)
I/O power supply voltage
24 VDC (20.4 to 26.4 VDC)
Noise immunity
Conforms to IEC 61000-4-4, 2.0 kV (power lines)
Vibration resistance
10 to 60 Hz, 0.7-mm double amplitude; 60 to 150 Hz, 50 m/s
2
Shock resistance
150 m/s
2
Dielectric strength
500 VAC (between isolated circuits)
Insulation resistance
20 M
Ω
minimum (between isolated circuits)
Ambient operating temperature
−
10 to 55
°
C
(with no icing or condensation)
Ambient operating humidity
25% to 85%
Operating environment
No corrosive gases
Ambient storage temperature
−
25 to 65
°
C
(with no icing or condensation)
Mounting
35-mm DIN Track mounting
Item
Specification
Input points
2 counter inputs (A and B) and 1 settable input (Z input or digital input)
Output points
1 digital output (settable)
Counter resolution
32-bit
Maximum counter input fre-
quency
60 kHz max. depending on the counter mode. Refer to
page 235 for details.
Overall response time
1 ms max. (See note.)
Isolation method
Photocoupler isolation between communications lines and inputs/output lines.
No isolation between inputs signal lines and output signal lines.
I/O connection method
Screwless Terminal block
Item
Specification
Model
GRT1-CT1
GRT1-CT1-1
Input type
NPN
PNP
Number of inputs
2 (A and B encoder inputs)
ON voltage
18.6 V min. (between input
terminal and V)
18.6 V min. (between input
terminal and G)
ON current
3.0 mA min.
OFF voltage
4.0 V max. (between input
terminal and V)
4.0 V max. (between input
terminal and G)
Содержание SMARTSLICE GRT1-DRT
