![background image](http://html1.mh-extra.com/html/omron/smartslice-grt1-drt/smartslice-grt1-drt_operation-manual_742293078.webp)
58
Functions of Digital I/O Units
Section 4-4
4-4-6
Operation Time Monitor
Function Overview
This function can measure and monitor the time between the ON/OFF transi-
tions of two bits. The Unit’s starting and ending bits can be selected freely.
The trigger edge (ON
→
OFF or OFF
→
ON), and input or output numbers can
be selected freely, providing flexibility when testing. A monitor value can be
set in the Unit to monitor the operating time, and turn ON a warning flag in the
Status Area when the set value is reached. A monitor value can be set in the
Unit, and when the operating time exceeds the monitor value, the Operation
Time Monitor Flag in the Status Area is turned ON. (Bit 2 of the Communica-
tions Unit’s Status Flags is turned ON.) The Programming Device can be
used to read the status of the flag.
Setting with a
Programming Device
This example shows how to use the DeviceNet Configurator (version 2.43 or
higher) to set the Operation Time Monitor function.
1,2,3...
1. Open the Network Configuration Window and double-click the desired
Slice I/O Terminal’s icon or right-click the icon and select
Parameters -
Edit
to display the Edit Device Parameters Window. Select the desired
Slice I/O Unit from the list on the
I/O Module
Tab Page and click the
Edit
Button to display the Edit Unit Parameters Window.
2. Select the
Operation Time
Tab.
3. Select the desired device and double-click the
Equipment Name
Column
to display the following window. Input the desired monitor value in the
Op-
eration Time
Field, specify the starting and ending I/O points, select the
trigger edge pattern (ON
→
OFF or OFF
→
ON), and then click the
OK
But-
ton.
Содержание SMARTSLICE GRT1-DRT
