background image

Operating Instructions

CD Stereo System

Model No.

 

SC-AK770

RQTV0286-2B

EG EB GN

Table of contents

Caution for AC Mains Lead ...................... 3
Safety precautions ................................... 4
Placement of speakers ............................. 4
Simple setup ............................................. 5
Preparing the remote control .................. 6
DEMO function .......................................... 7
Handling of the disc trays and discs ...... 7
Overview of controls ................................ 8
Discs ........................................................ 10
Cassette tape – Play and record ........... 12
Using the FM/AM radio ........................... 13
Using the timers ..................................... 14
Using sound effects ............................... 15
Using other equipment .......................... 16
Troubleshooting guide ........................... 20
Specifi cations ......................................... 22
Maintenance ............................................ 23
When moving the unit ............................ 23

Dear customer

Thank you for purchasing this product.
For optimum performance and safety, please read these instructions 
carefully.

These operating instructions are applicable to the following system.

System

SC-AK770

Main unit

SA-AK770

Front speakers

SB-AK770

Subwoofer

SB-WAK770

Unless otherwise indicated, illustrations in these operating 
instructions are for the United Kingdom and Continental Europe.

Operations in these instructions are described mainly using the 
remote control, but you can perform the operations on the main unit 
if the controls are the same.

Your unit may not look exactly the same as illustrated.

SUPPLIED ACCESSORIES

SUPPLIED ACCESSORIES

Please check and identify the supplied accessories.
Use numbers indicated in parentheses when asking for 
replacement parts. (As of January 2008)

1 x AC mains lead

For the United Kingdom

(K2CT3CA00004)

For Continental Europe

(K2CQ2CA00007)

For Australia and N.Z.

(K2CJ2DA00008)

 1 x Remote Control

(N2QAYB000279)

2 x Remote control 

batteries

1 x FM indoor antenna

(RSA0007-L1)

 1 x AM loop antenna

(N1DAAAA00001)

Before connecting, operating or adjusting this product, please 
read these instructions completely. 
Please keep this manual for future reference.

Note:

“EB” on the packaging indicates the United Kingdom.

RQTV0286-2B.indd   1

RQTV0286-2B.indd   1

5/21/08   10:17:36 AM

5/21/08   10:17:36 AM

Summary of Contents for SA-AK770

























Reviews: