Quick Start Guide
PLS-900 ListenWiFi Personal Listening System
Let’s Get This Audio Started
1. PLACE
The PL-900 Server
should be plugged directly into
the
PL-400 Audio Interface
. Do not use USB hubs or
extenders.
If the audio source is more than 6 ft. (1.8
m.) from the server, it’s recommended to run
shielded
audio
cable or use
audio
balun extenders.
T
he Wireless Access Point (WAP) should be placed
center to the listening area high enough that the
majority of mobile devices will have a clear line-of-
sight. If the ceiling is more than 15 ft. (4.5 m.) high,
the WAP should be lowered. Keep the WAP as far
away as possible from other WAPs and electrical
equipment.
Note: The top side of the WAP (opposite of the
mounting holes) should face the coverage area.
2. CONNECT
Follow the diagram for the directions on connecting
the components.
RCA UNBALANCED
AUDIO SOURCES
PL-400
(FRONT)
USB 2.0
HIGH SPEED
POWER SUPPLY
POWER SUPPLY
TO INTERNET ROUTER
PL-400
(BACK)
PL-900
(BACK)
PL-200
(FRONT)
WAP
(BACK)
CAT 5/6
CAT 5
CAT 6
