Omron NX-SIH400, Руководство пользователя

Страница: 432 / 626

Event code Event name Meaning Assumed cause
Level
Reference
M
a
j
P
rt
M
i
n
O
b
s
I
n
f
o
80300000 hex
[NX-SL3
£££
]
Safety Proc-
ess Data
Communica-
tions Time-
out A communications
timeout occurred in
safety process data
communications with
the Safety Control
Unit.
•
A setting is not correct. The
setting of the safety task peri-
od is too short.
•
There is excessive noise.
•
The Safety CPU Unit or safety
slave entered a status where it
could not continue safety proc-
ess data communications.
•
The process data communica-
tions were not performed cor-
rectly because an error or sta-
tus change occurred in the NX
bus master to which the Unit is
connected.
¡ page
12 - 37
80300001 hex
[NX-SL5
£££
]
FSoE Mas-
ter Connec-
tion Timeout A communication
timeout occurred in
FSoE communica-
tions with the FSoE
slave.
•
A setting is not correct. The
setting of the safety task peri-
od is too short.
•
There is excessive noise.
•
The Safety CPU Unit or FSoE
slave entered a state where it
could not continue FSoE com-
munications.
•
The process data communica-
tions were not performed cor-
rectly because an error or sta-
tus change occurred in the NX
bus master to which the Unit is
connected.
¡ page
12 - 38
80310000 hex
[NX-SL5
£££
]
CIP Safety
Originator
Connection
Not Estab-
lished Error CIP safety originator
connection was not
established.
•
The target node is different.
•
The target node is not config-
ured.
•
The target node status is inva-
lid.
¡ page
12 - 39
80320000 hex
[NX-SL5
£££
]
CIP Safety
Originator
Connection
Timeout A timeout occurred in
CIP safety originator
connection.
•
The communications cable is
disconnected or broken.
•
The target node entered a
state where it could not accept
the connection.
•
The timeout value in the com-
munications setup is too small.
•
There is excessive noise.
¡ page
12 - 40
80330000 hex
[NX-SL5
£££
]
CIP Safety
Target Does
Not Exist The target node does
not exist.
•
The communications cable is
disconnected or broken.
•
The target node entered a
state where it could not accept
the connection.
•
The timeout value in the com-
munications setup is too small.
•
There is excessive noise.
¡ page
12 - 41
12 Troubleshooting
12 - 20
NX-series Safety Control Unit User's Manual (Z930)