manualshive.com logo in svg

Omron NX-SIH400, Руководство пользователя

Скачайте бесплатный пользовательский мануал для продукта Omron NX-SIH400 на нашем вебсайте. Этот мануал предоставит вам всю необходимую информацию для работы с устройством. Посетите наш manualshive.com, чтобы скачать мануал бесплатно и ознакомиться с особенностями продукта.

Поделиться
Скачать
background image

Terminology

Term

Description

standard

The generic term for devices, functions, and data that are used for general control purposes
as opposed to those that are used for safety measures.

safety function

A function that is executed by the safety control system to achieve a safe state for a machine
hazard.

safe state

The status of a device or piece of equipment when the risk of danger to humans has been
reduced to an acceptable level.

safety signal

A signal that is used for safety controls.
In this safety control system, the data type of a variable determines whether a signal is relat-
ed to the safety controls. Broadly speaking, there are two data types: safety data types and
standard data types.

standard signal

A signal or data that is used for general control purposes.

Safety data type

The data type for a safety signal.

Standard data type

The data type for a standard signal.

safety reaction time

The time required for the system to enter a safe state in a worst-case scenario after the oc-
currence of a safety-related input (press of an emergency stop pushbutton switch, interrup-
tion of a light curtain, opening of a safety door, etc.) or device failure.
The reaction time of the system includes the reaction times of sensors and actuators, just
like the reaction time for a Controller or network.

safety control

A type of control that uses devices, functions, and data that are designed with special safety
measures.

standard control

A type of control that use devices, functions, and data that are designed for general control
purposes. This term is used to differentiate from a safety control

safety process data communications

A type of I/O data communications that is used for safety control purposes.

standard process data communications

A type of I/O data communications that is used for standard control purposes.

Safety I/O connection

A type of connections that is used for safety process data communications.

CIP Safety connection

Safety I/O connection that is used to transmit safety process data by the communication pro-
tocol called CIP Safety. CIP Safety originator connection and CIP Safety target connection
are available depending on the roles of communications.

CIP Safety originator connection

A CIP Safety connection when an own node is a CIP Safety originator.

CIP Safety target connection

A CIP Safety connection when an own node is a CIP Safety target.

CIP Safety originator

A role in CIP Safety communications. A CIP Safety originator manages a CIP Safety connec-
tion for a CIP Safety target. CIP Safety originator exists in a connection unit, and not in a
device unit.

CIP Safety target

A role in CIP Safety communications. A CIP Safety target receives a request to open a CIP
Safety connection from a CIP Safety originator. CIP Safety target exists in a connection unit,
and not in a device unit.

single-cast connection

A safety process data communications method in CIP Safety. A CIP Safety originator and a
CIP Safety target communicate one-to-one in this connection.
You can apply this setting for both of input data and output data.

multi-cast connection

A safety process data communications method in CIP Safety. A CIP Safety target sends the
input data of the CIP Safety target in multi-cast to multiple CIP Safety originators in this con-
nection.
This is a connection type you can set only for input data of a CIP Safety target. You cannot
apply this setting for output data.

FSoE master connection

Master safety I/O connection that is used to transmit safety process data by the communica-
tion protocol called FSoE.

safety master connection

The generic term for the CIP Safety originator connection and the FSoE master connection.

exposing global variables to the NJ/NX-
series CPU Unit

Exposing specified global variables to the NJ/NX-series CPU Unit to allow the exchange of
standard signals between the NJ/NX-series CPU Unit and the Safety CPU Unit.

Safety Control Unit

The generic term for a Unit that is used in safety controls.

Safety CPU Unit

A CPU Unit that is used for safety controls. This is a type of NX Unit.

Safety I/O Unit

An I/O Unit that is used for safety controls. This is a type of NX Unit.

Terminology

39

NX-series Safety Control Unit User's Manual (Z930)

Содержание NX-SIH400



















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NX-SIH400

2gig Technologies GC3 Manual preview
GC3
Бренд: 2gig Technologies Страницы: 4
2gig Technologies GC3 Quick Start Manual preview
GC3
Бренд: 2gig Technologies Страницы: 2
G1SLE MK2 Alignment Manual preview
MK2
Бренд: G1SLE Страницы: 2
Yardney Synergy Quick Start Manual preview
Synergy
Бренд: Yardney Страницы: 8
Bard ECU Series Advanced Programming & Features preview
ECU Series
Бренд: Bard Страницы: 8
Bardiani Valvole B925 Use And Maintenance Manual preview
B925
Бренд: Bardiani Valvole Страницы: 35
Danfoss VLT HVAC Operating Instructions Manual preview
VLT HVAC
Бренд: Danfoss Страницы: 85
Danfoss VLT Decentral FCD 300 Operating Instructions Manual preview
VLT Decentral FCD 300
Бренд: Danfoss Страницы: 112
Danfoss AME 55QM Datasheet preview
AME 55QM
Бренд: Danfoss Страницы: 4
Danfoss VLT 6000 series Manual preview
VLT 6000 series
Бренд: Danfoss Страницы: 27
Danfoss AME 20 Operating Manual preview
AME 20
Бренд: Danfoss Страницы: 16
Danfoss AK-PC 420 User Manual preview
AK-PC 420
Бренд: Danfoss Страницы: 20
Danfoss ADAP-KOOL AK-PC 781 User Manual preview
ADAP-KOOL AK-PC 781
Бренд: Danfoss Страницы: 14
Danfoss 4033 Installation And User Instructions Manual preview
4033
Бренд: Danfoss Страницы: 12
Danfoss vlt soft starter mcd 500 Operating Manual preview
vlt soft starter mcd 500
Бренд: Danfoss Страницы: 96
Eaton XN300 Manual preview
XN300
Бренд: Eaton Страницы: 288
IBM 3746-900 Installation Manual preview
3746-900
Бренд: IBM Страницы: 276
IBM 4769 Installation Manual preview
4769
Бренд: IBM Страницы: 32

Бренды по названию

Популярные бренды

Загрузить еще бренды