Omron NS -, Руководство по программированию

Страница: 625 / 683

Section 5 Troubleshooting and Maintenance 5-2 Error Messages
5-20
NS Series Programming Manual
Message Cause Possible countermeasure
Failed to read host registra-
tion. Correct host registration
with CX-Designer. Then,
press OK and then download
project data. Project data cannot be
downloaded (was not
transmitted or is cor-
rupted). Use a Programming Device to repair the data
and try to download it again.
Time-out error occurred while
writing by the following case:
Disconnection of the
connecting cable
Stopped host_- Incorrect
time-out period
Allocation Host: XXXX
Do you want to retry?
NS5:
Time-out error occurred while
writing the data
Allocation Host: XXXX
Do you want to retry? The communications
cable is not properly
connected. The host
communications
service has stopped.
The timeout monitoring
time is too short. Check the cable connection and conduct a
continuity test. Replace the cable if there is a
cable error, or rewire the cable if necessary.
Time-out error occurred while
writing due to the following:
Disconnection of the con-
necting cable
Stopped host_- Incorrect
time-out period
Allocation Host: XXXX
Do you want to retry?
NS5:
Time-out error occurred while
writing to the System Memory
Area.
Allocation Host: XXXX
Do you want to retry?
The communications
cable is not properly
connected. The host
communications
service has stopped.
The timeout monitoring
time is too short. Check the cable connection and conduct a
continuity test. Replace the cable if there is a
cable error, or rewire the cable if necessary.
Communication error
detected while writing by the
following case:
Corrupted data by noise
Transmit error by the host
Allocation Host: XXXX
Do you want to retry?
NS5:
Communication error de-
tected while writing to the
System Memory Area
Allocation Host: XXXX
Do you want to retry? Data corrupted by
noise
Invalid host communi-
cations command
Check the cable connection and conduct a
continuity test. Replace the cable if there is a
cable error, or rewire the cable if necessary.