Omron NS -, Руководство по программированию

Страница: 108 / 683

Section 2 NS Series Functions 2-6 Fixed Objects
2-61
NS Series Programming Manual
R
R
R
e
e
e
f
f
f
e
e
e
r
r
r
e
e
e
n
n
n
c
c
c
e
e
e
♦
Care must be taken when setting the start and end points of lines within frames so that the line is
not positioned outside the frame area. Be careful when setting the position so that the line is not
outside the screen.
♦
Validation can be performed to check for lines outside the screen or frame area. For details on error
checks, refer to
Validation
in the CX-Designer Online Help .
Flicker
Make settings on the Flicker Tab Page to make fixed objects flicker (flash).
1
2
No. Item Details
1 Set the flicker setting
for each object Alternately displays the fixed object display color and its inverse color.
The following three flicker speed options can be selected.
Low flicker
Middle flicker
High flicker
2 Use the flicker
common setting Used to select the flicker method from the Flicker No. options set under PT –
Flicker – Flicker Settings .
Refer to 2-8-13 Flicker (Extension Tab) for details on flicker settings.
N
N
N
o
o
o
t
t
t
e
e
e
♦
Select None under Flicker Speed or Flicker No. to have the object not flicker.
♦
If inverse flicker is selected under the flicker common settings, the whole fixed object will be dis-
played in inverse colors, including straight lines, continuous straight lines, and arc, regardless of the
flicker range setting.
♦
If inverse flicker is set for a 3-dot frame or 5-dot frame under the flicker common settings, the out-
side of the fixed object (screen background) of polygons and sectors will also be displayed in in-
verse colors.