Omron NS -, Руководство по программированию

Страница: 624 / 683

Section 5 Troubleshooting and Maintenance 5-2 Error Messages
5-19
NS Series Programming Manual
Message Cause Possible countermeasure
Time-out error occurs while
downloading by the following
case:
•
Disconnection of the con-
necting cable.
•
Stopped host
•
Incorrect time-out period.
NS5:
Time-out error occurs while
downloading Host
Allocated host: XXXX
The communications
cable is not connected
properly.
The host communica-
tions service has
stopped.
The timeout monitor
time is too short.
Check the cable connection and conduct a
continuity test. Exchange the cable if there is
a cable error. If necessary, rewire the cable.
Communication error
detected while downloading
by the following case:
•
Corrupted data by noise
•
Transmit error by the host
MRES=XXX, SRES=XXXX
NS5:
Communication error de-
tected while downloading the
data
Allocated host: XXXX
Data corrupted by
noise.
Invalid host communi-
cations command.
Check the cable connection and conduct a
continuity test. Exchange the cable if there is
a cable error. If necessary, rewire the cable.
Addressing error exists in the
screen, alarm, data log, or
macro. Correct address set-
ting by the CX-Designer.
Screen No.: XXXX
Allocation Host: XXXX
Allocation Address: XXXX
MRES: XXXX
SRES: XXXX
NS5:
Addressing error exists in the
screen, alarm, data log or
macro.
Screen No.: XXXX
Allocation Host: XXXX
Allocation Address: XXXX
MRES: XXXX
SRES: XXXX An illegal address is
set. Press the OK Button to go to the System
Menu. Select Data Check to see whether the
address is valid and the communications
settings are correct. Use CX-Designer to
change settings if necessary.
Communication error
detected while uploading by
the following cases:
Corrupted data by noise
Transmit error by the host
Allocation Host: XXXX
NS5:
Communication error de-
tected while uploading the
data
Allocation Host: XXXX Data corrupted by
noise
Invalid host communi-
cations command
Check the cable connection and conduct a
continuity test. Replace the cable if there is a
cable error, or rewire the cable if necessary.