Omron FQ2-S4 Скачать руководство пользователя страница 82

Страница: 82 / 594

Adjusting the Images That Were Taken

FQ2-S4 User’s Manual

• Detailed Settings for Search Position Compensation

The settings for the Search Position Compensation item are almost the same as those for the Search

inspection item. Only the [Multi-point output] setting of the Search item is not included in the settings of the

Search Position Compensation item. Make the settings for teaching and the judgement conditions in the same

way as for the Search item. (

4-8 Inspecting with the Search Inspection Item: p. 137)

Also, the following settings are included only in the Search Position Compensation Item.

• Source Image

You can select the image to which to apply the results of position compensation processing.

Applying the Results of Position Compensation: p. 76

• Interpolation

You can select the precision of position compensation.

If you select [Bilinear], the precision of position compensation will increase.

[Image]

−

[Image adjustment]

−

[Search position comp.]

−

[Modify]

−

[Details]

−

[Scroll parameter]

−

[Interpolation]

The settings are the same as those for the Shape Search Position Compensation item.

Interpolation: p. 78

• Measurement Data That Can Be Used for External Outputs and Calculations

The following values can be used as measurement data and output to external devices via Ethernet or used in

calculations.

Press [Model]

−

[Search position comp.]

Make any detailed settings as required for the position compensation processing.

Refer to

Detailed Settings for Search Position Compensation

, below.

Press [OK].

Press [Back].

Expression text string

Data name

Description

Data range

Judgement

This is the judgement result.

−

2: No judgement (not measured),

0: Judgement is OK,

−

1: Judgement is NG

Scroll X

This is the amount of position com-
pensation for the X coordinate.

−

99,999.9999 to 99,999.9999

Scroll Y

This is the amount of position com-
pensation for the Y coordinate.

−

99,999.9999 to 99,999.9999

Position X

This is the X coordinate of the position
where the model was found.

−

99,999.9999 to 99,999.9999

Position Y

This is the Y coordinate of the position
where the model was found.

−

99,999.9999 to 99,999.9999

Reference X

This is the X coordinate of the position
where the model was registered.

−

99,999.9999 to 99,999.9999

Reference Y

This is the Y coordinate of the position
where the model was registered.

−

99,999.9999 to 99,999.9999

Correlation

This is the correlation.

0 to 100

Содержание FQ2-S4



















































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание FQ2-S4

Отзывы:

Похожие инструкции для FQ2-S4

Бренды по названию

Популярные бренды

Omron FQ2-S4, Руководство пользователя

Результаты поиска

Содержание FQ2-S4

Отзывы:

Похожие инструкции для FQ2-S4

Бренды по названию

Популярные бренды