Omron F3SG-R Series, Руководство пользователя

Страница: 82 / 128

62
Chapter
4
M
ount
in
g
F3SG-4RA-25-02TS
User’s Manual
Wiring/Installation
3.
Securely tighten the Mounting Screws to fix the Free-Location Bracket to the F3SG-R housing. The
recommended torque to tighten the Mounting Screws is 3.0 N•m. Then loosen the Alignment Screws
(hexagon socket head cap screws (M4×22)). (Fig. 3)
- Tightening screws with a torque that considerably exceeds the recommended torque may cause failure.
- The width across flat of the hexagon socket of the Alignment Screws is S=3.
4.
Power the F3SG-R on to perform beam alignment.
Move the emitter and receiver from side to side (Fig. 4) to align them to a center position where the
Stable-state indicator (STB, green) of the receiver is illuminated while checking the state of the top and
bottom beams with the Top-beam-state indicator (TOP, blue) and Bottom-beam-state indicator (BTM,
blue) of the receiver. (Fig. 6)
- The angle adjustment range of the Free-Location Brackets is ±15°.
- It is recommended to use the Light Level Monitoring with the Configuration Tool for beam alignment. Refer to
Safety
Light Curtain Configuration Tool for Model F3SG (SD Manager 2) User’s Manual for more information.
Fig. 3
Mounting Screw
Alignment Screw
(hexagon socket
head cap screw
(M4×22))
Alignment Screw
(hexagon socket
head cap screw
(M4×22))
Mounting Screw
Mounting Screw
Alignment Screw
2. loosen this
2. loosen this
1. Securely
tighten this
1. Securely
tighten this
Fig. 4 Fig. 5
<Emitter>
EMITTER
<Receiver>
RECEIVER
TOP(Blue)
STB(Green)
BTM(Blue)