Omron F3SG-R Series, Руководство пользователя

Страница: 28 / 128

8
Chapter
1
Ra
tings
/Sp
ecif
ic
a
tion
s
F3SG-4RA-25-02TS
User’s Manual
Overview and Specifications
1-5. Ratings / Specifications
The
□□□□
in the model names indicate the protective heights in millimeters.
F3SG-4RA  -25-02TS
Performance
Object Resolution
(Detection Capability)
Opaque objects, 25-mm dia.
Beam Gap 20 mm
Number of Beams 12 to 96
Lens Size 6.0 × 5.0 (W × H) mm
Protective Height 240 to 1920 mm
Operating Range 0.3 to 17.0 m
Response Time
ON to OFF Normal mode: 8 to 13 ms *
OFF to ON Normal mode: 40 to 90ms (synchronized), 140 to 190ms (not synchronized) *
*. Response time when used in one segment system or in cascaded connection.
1-6. List of Models for more information.
Effective Aperture Angle
(EAA) (IEC 61496-2)
±2.5° max., emitter and receiver at operating range of 3 m or greater
Light Source Infrared LEDs, Wavelength: 870 nm
Startup Waiting Time 2 s max.
Electrical
Power Supply Voltage (Vs)
SELV/PELV 24 VDC±20% (ripple p-p 10% max.)
Current Consumption
1-6. List of Models
Safety Outputs (OSSD)
Two PNP transistor outputs
Load current of 300 mA max., Residual voltage of 2 V max. (except for voltage drop due to cable
extension), Capacitive load of 1

F max., Inductive load of 2.2 H max. *1
Leakage current of 1 mA max. *2
*1. The load inductance is the maximum value when the safety output frequently repeats ON and OFF.
When you use the safety output at 4 Hz or less, the usable load inductance becomes larger.
*2. These values must be taken into consideration when connecting elements including a capacitive
load such as a capacitor.
Auxiliary Output
One PNP transistor output
Load current of 100 mA max., Residual voltage of 2 V max .
Output Operation
Mode
Safety
Output
Light-ON (Safety output is enabled when the receiver receives an emitting signal.)
Auxiliary
Output
Reverse output of safety output
Input Voltage
External
device
monitoring
input
(Lockout
reset input)
ON voltage: Vs-3 V to Vs (short circuit current: approx. 6.5 mA) *
OFF voltage: 0 V to 1/2 Vs, or open (short circuit current: approx. 8.0 mA) *
Test input
24 V Active setting:
ON voltage: 9 V to Vs (short circuit current: approx. 2.5 mA) *
OFF voltage: 0 to 1.5 V or open (short circuit current: approx. 2.0 mA)
0 V Active setting:
ON voltage: 0 to 3 V (short circuit current: approx. 2.0 mA)
OFF voltage: 9 V to Vs or open (short circuit current: approx. 2.5 mA) *
* The Vs indicates a supply voltage value in your environment.
Overvoltage Category
(IEC 60664-1)
II
Indicators 1-4-1. LED Indicator Status
Protective Circuit Output short protection, Power supply reverse polarity protection
Insulation Resistance 20 M

or higher (500 VDC megger)
Dielectric Strength 1,000 VAC, 50/60 Hz (1 min)