Omron F3SG-R Series, Руководство пользователя

Страница: 84 / 128

64
Chapter
4
M
ount
in
g
F3SG-4RA-25-02TS
User’s Manual
Wiring/Installation
4-4-3-2. Mounting with Top/Bottom Bracket (F39-LGRTB-
□
) and
Intermediate Bracket (F39-LGRA)
The mounting procedure below shows the procedure using the F39-LGRTB, but this procedure is also
applicable to the F39-LGRTB-2 and F39-LGRTB-3.
1.
Loosen the Alignment Screws (hexagon socket head cap screw (M4×7)) of the Top/Bottom Bracket (3)
and change the angle of the Top/Bottom Bracket (3) according to its mounting direction. Then loosen
the Mounting Screws (low head hexagon socket head cap screw (M4×7)) of Top/Bottom Bracket (2).
(Fig. 1)
The width across flat of the hexagon socket of the Alignment Screws and Mountng Screws is S=3.
2.
Slide the Top/Bottom Bracket (1) in the grooves of the F3SG-R housing. Adjust the Top/Bottom Bracket
to the mounting position of the wall surface. Make sure to position the whole body of the Top/Bottom
Bracket (1) within the golden area of the housing. Securely tighten the Mounting Screws to fix the Top/
Bottom Bracket to the housing of the F3SG-R. The recommended torque to tighten the Mounting
Screws is 3.0 N•m. (Fig. 2)
Tightening screws with a torque that considerably exceeds the recommended torque may cause failure.
1. Loosen these
2.Adjust the angle
2.Adjust the angle
Top/Bottom
Bracket (1)
Top/Bottom
Bracket (1)
Top/Bottom Bracket (3) Top/Bottom Bracket (3)
Top/Bottom
Bracket (2)
Top/Bottom
Bracket (2)
<Side mounting> <Backside mounting>
Alignment Screws
(hexagon socket
head cap screw (M4×7)) Alignment Screws
(hexagon socket
head cap screw (M4×7)) Mounting Screws
(hexagon socket head
cap screw (M4×7))
Top/Bottom
Bracket (2)
Top/Bottom Bracket (3)
Fig. 1
3. Loosen these
1. Loosen these
Fig. 2
Securely tighten these Securely tighten these
<Backside mounting>
<Side mounting>
Slide into the housing Slide into the housing
Mounting Screws
Mounting Screws