![background image](http://html1.mh-extra.com/html/omron/b5l/b5l_user-manual_740786057.webp)
Chapter 4 Command Description
4-20 Set Enabling/Disabling Operation Check LED (95Hex)
3D TOF Sensor Module B5L User's Manual (No. E596)
4-20 Set Enabling/Disabling Operation Check LED (95Hex)
Enables or disables the operation check LED.
When disabled, the operation check LED cannot be lit/flashing after startup.
Command (from host to this product)
Synchroniz
ation code
Command
No.
Data length
Data
FEHex
95Hex
00Hex 01Hex
See below for details
Response (from this product to host)
Synchroniz
ation code
Response
code
Data length
Data
FEHex
Normal
end: 00Hex
00Hex
00Hex
00Hex
00Hex
Error:
FFHex to
F0Hex
00Hex
00Hex
00Hex
00Hex
・
Data details
Specify 0 to enable the operation check LED or 1 to disable it.
The default value is 0 (enable).
This product's status
Operation check LED status
Enabled
Disabled
When power is turned
ON
Solid ON
Solid ON
Under normal
operation
Solid ON
Not lit
Error occurred
*1
Flashing
Not lit
The status is enabled or disabled immediately after receiving the command.
*1: A status in which this product cannot be properly started up due to an error such as a
device error.
57