![background image](http://html1.mh-extra.com/html/omron/b5l/b5l_user-manual_740786010.webp)
Safety Precautions
10
3D TOF Sensor Module B5L User's Manual (No. E596)
Precautions for Safe Use
Check the Product for physical damage upon opening its package.
It is recommended to wear gloves when opening the package.
Follow the indications listed below for a safe use of “the Product”.
(1) Installation Environment
There is potential internal deterioration and damage of internal parts of the Device.
•
Do not use “the Product” in conditions exceeding the ratings for temperature and humidity.
•
Do not use “the Product” in an environment where condensation occurs.
•
Do not use “the Product” in an environment subjected to water, oil or chemicals spills.
•
Do not use “the Product” in an environment subjected to corrosive, combustible or explosive gas.
•
Do not use “the Product” in an environment where dust, salt or iron powder are present.
(2) Power Supply and Wiring
The following will result in fire if ignored.
•
Make sure there is no faulty wiring of I/O terminals, etc.
•
Do not connect the DC power supply terminal to AC power.
•
Do not connect “the Product” to DC voltage above the rated capacity.
•
Do not reverse-connect the DC power supply.
•
Make sure to turn the Device off before removing cables.
•
Make sure to check the Device and the connector pins for distortion or physical damage before
connecting the Device to the Connector.
•
Check the cables for physical damage.
(3) Others
•
Treat “the Product” as industrial waste when disposing of it.
•
Use the M4 screws on the fixing holes on the Device when fixing it.
•
Make sure not to twist, bend or break the Device when fastening the screws. The following will
result in accident or deterioration if ignored.
•
Install “the Product” with attention being paid to dust prevention so that foreign objects will not
enter during use. The following will result in short circuit or long-term reliability decline due to
foreign objects if ignored.
•
For safety’s sake, installation and wiring should be performed by professional technicians.
•
Do not drop “the Product” during installation and use. The following will result in accident or
deterioration if ignored.
•
Install “the Product” after confirming that there are no people around under the place of
installation.