3 - 21
3 Network Startup
CompoNet Communications Unit User’s Manual (I582-E1)
3-2
Network C
onf
igu
ra
tion
3
3-
2-5 R
egistra
tion
Table
Configuration
1
Power on the inverter(s) first and configure the following settings according to
• Set the node address. According to
on page 3-15, set the
rotary switches or CompoNet node address (P190).
• Set the type of Remote I/O. Set inverter parameter P046 (Assembly Instance No.) to 0 (Basic
Speed I/O) or 1 (Extended Speed I/O).
Precautions for Correct Use
Precautions for Correct Use
• Be sure to set the type of Remote I/O at this point. The number of words occupied by the
CompoNet Communications Unit varies with the Remote I/O type. Unless the Remote I/O
type is set correctly, automatic network configuration cannot be completed successfully.
• To connect additional CompoNet Slaves, set the node addresses for them simultaneously.
2
With the REGA switch on the front of the Master Unit set to ON, cycle the power supply of
the inverter. Then, power on all network components (Master Unit, other Slaves, and
Communications power supply). Then, to configure the network, start the network con-
figuration tool CX-Integrator.
3
Click the Auto Online icon [
] in the CX-Integrator toolbar to establish Auto Online
connection.
When connected successfully, CX-Integrator displays the online status and the target PLC
information in the [Online Connection Information window].
4
In the Online Connection Information window, right-click the CompoNet Communications
Unit under the target PLC and select [Connect].
5
The Transfer dialog box is displayed, prompting you to select the data you want to transfer.
Select the target data and click the [Transfer] button. Here, select [Network structure only].
Precautions for Correct Use
Precautions for Correct Use
The [Network structure and Parameters for each component] option requires a parameter
transfer time of approximately 15 seconds per node.
This means that it may take as much as approximately 100 minutes for the transfer process to
complete.
Содержание 3G3AX-MX2-CRT-E
