●
The protective valve has IP68 protection rating (can be submerged in water 2m/60min)
and -40°C ~ 125°C operating temperature range.
Figure 3-4 Protective Valve
3.3 Mounting Indications
3.3.1 Main Unit
To secure Main Unit enclosure to a wall:
1. Find the mounting holes covered by the blind lids at opposite borders of the Main Unit
enclosure. They might be easier to locate after reviewing section 3.2.1.
2. Prepare the surface on which the Main Unit will be placed, taking into account the
distance between the holes previously found.
3. Use M3 screws (and nuts, washers, or plastic anchors, if needed) to fix the device where is
required.
To mount Main Unit on a pole:
1. Find the mounting holes covered by the blind lids at opposite borders of the Main Unit
enclosure. This might be easier after reviewing the previous section.
2. Attach the pole mounting bracket accessories that come with the delivery to the Main
Unit, using the screws provided by the manufacturer.
3. Finally, fasten the Main Unit to its pole using proper mounting straps.
www.omicroning.co March 2020
14
