Omicron Lab CT Analyzer, Руководство пользователя

Страница: 145 / 254

143
Using the Quick Test Feature
Figure 8-4 Results Advanced card with default selection for the displayed
results
The following table lists the calculated results available for the Advanced
measurement type. Use the cursor keys to move the cursor to a field and then
select the result to be displayed in this field using the available soft keys.
Soft key /
result Description
N Ratio calculated from the values measured at inputs "Sec" and
"Prim".
Z Impedance, calculated from the amplitude and phase angle of
the output signal and the voltage measured at input "Sec".
Rp, Rs Use the Rp/Rs soft key to switch between R
p
and R
s
.
Parallel or serial resistance, calculated from the output signal
and the voltage measured at input "Sec".
Xp, Xs Use the Xp/Xs soft key to switch between X
p
and X
s
.
Parallel or serial reactance, calculated from the output signal
and the voltage measured at input "Sec".
cos
ϕ
Power factor of the measured impedance.
Lp, Ls or
Cp, Cs Use the Lp/Ls (or Cp/Cs ) soft key to switch between L
p
(C
p
)
and L
s
(C
s
).
Parallel or serial inductance or capacitance of the test object,
calculated from the output signal and the voltage measured at
input "Sec".
The CT Analyzer automatically detects whether the test object
is an inductance or a capacitance based on the phase angle.
f Frequency measured at input "Sec".