![background image](http://html1.mh-extra.com/html/omega/uwbt-series/uwbt-series_user-manual_4162735099.webp)
RH High Alarm
You can set alarm value to the highest measurable RH percentage by using
custom key board entry. For example, you can only set up to 98% for RH high
alarm.
RH Low Alarm
You can set alarm value to the lowest measurable RH percentage by using
custom key board entry. For example, you can only set as low as 2% for RH low
alarm.
RH Deadband
RH dead band should always be a positive number. RH dead band is useful
to create high and low alarm hysteresis for RH. The following are examples of
deadband settings for RH/Temp transmitters:
High alarm state
- If you set the RH deadband to 5% and the high alarm value
to 90%, the device will be in a high alarm state (red LED blinks 2 times every 2
seconds) when the RH measurement reaches 90% or above. The device will stay
in the alarm state until the RH measurement reaches 85% or below (“high alarm
value – deadband value”).
Low alarm state
- If you set the RH deadband to 5% and the low alarm value
to 20%, the device will be in a low alarm state (red LED blinks 2 times every 2
seconds) when the RH measurement reaches 20% or below. The device will stay
in the alarm state until the RH measurement reaches 25% or above (“low alarm
value + deadband value”).
Figure 5-44. RH Deadband Of 1% RH
Software Instructions (Android)
5
5-30
Содержание UWBT Series
Страница 44: ...4 14 Figure 4 15 Temperature Gauge Figure 4 16 RH And Temperature Gauge 4 14 Software Instructions iOS 4...
Страница 79: ...Figure 5 12 Sample CSV File Figure 5 13 Sample TXT File Software Instructions Android 5 5 10...
Страница 119: ...Figure 6 16 Save All Settings Screen Software Instructions PC App 6 6 17...