Omega UWBT Series, Руководство пользователя

Страница: 92 / 161

Transmitter Name
The UWBT Bluetooth wirelesss transmitter comes with a factory set default
sensor name. You can change to a preferred sensor name by typing the new
name in the field shown below, and then clicking the “Done” button. You also
need to save the new name to the transmitter by clicking the “Save all Settings”
button on the app. Once set to the new sensor name, the settings for sensor name
are saved internally in the transmitter handle. You need to unpair and repair
with the transmitter to reflect the new name; there is no need to switch off the
tablet or transmitter.
Sensor names cannot be saved in characters outside of the
English alphanumeric set. Special characters (e.g. !@#.) also
cannot be used in setting the transmitter name.
Transmitter names are limited to 15 characters.
After renaming your transmitter, follow these steps to re-pair with your newly
named transmitter:
1. Unpair with your UWBT transmitter under the ‘Transmitter Pairing’ section
2. Go to your smart device’s ‘Settings’ menu
➞
Bluetooth section
3. Select the transmitter’s old name, and select ‘Unpair’
4. Return to the UWBT app, and continue the standard pairing process.
Figure 5-33. Changing The Transmitter Name
Software Instructions (Android)
5
5-23
NOTE:
NOTE: