![background image](http://html1.mh-extra.com/html/omega/uwbt-series/uwbt-series_user-manual_4162735022.webp)
2.6 Batteries & Power
2.6.1 Charging The UWBT Transmitter
In order to ensure maximum battery charge upon use, make sure to fully charge
the UWBT before using the transmitter. You will know the transmitter is fully
charged when the yellow LED blinks once every second.
The UWBT transmitter handle is provided with two (2) AA NiMH rechargeable
batteries installed. You can easily recharge the batteries by plugging the
provided USB cable into the handle, and connecting to the AC adapter provided.
You can also charge the unit by connecting the USB cable into the USB port of a
PC/laptop.
Use only rechargeable NiMH batteries with your UWBT
transmitter. Do not use Alkaline batteries.
2.6.2 Replacing The Rechargeable AA Batteries
In case you cannot connect to a power source to recharge the 2 NiMH batteries,
you can replace them with 2 other rechargeable NiMH batteries. To replace the
batteries, use a Phillips screwdriver to open the battery door as shown in the
diagram below. Remove the batteries and replace as shown.
Figure 2-15. Replacing The Rechargable AA Batteries
Transmitter Instructions (Hardware)
2
2-10
REMOVE THE 2 SCREWS WITH
A PHILLIPS HEAD SCREWDRIVER
FOR EASIER BATTERY REMOVAL,
REMOVE THE TOP BATTERY FIRST.
THEN YOU CAN REMOVE THE
SECOND BATTERY WITH A SMALL
FLAT-HEAD SCREWDRIVER.
+
+
–
–
NOTE:
Содержание UWBT Series
Страница 44: ...4 14 Figure 4 15 Temperature Gauge Figure 4 16 RH And Temperature Gauge 4 14 Software Instructions iOS 4...
Страница 79: ...Figure 5 12 Sample CSV File Figure 5 13 Sample TXT File Software Instructions Android 5 5 10...
Страница 119: ...Figure 6 16 Save All Settings Screen Software Instructions PC App 6 6 17...