USING YOUR CRIME GUARD SYSTEM
Your new Crime Guard security system is designed to deter theft of both
your vehicle and its contents.
Arming
the system turns on the protection
operation, disables the vehicle’s starter and locks the doors provided an
interface is installed. Once the system is
Armed
, any intrusion attempt will
Activate
it, sounding the siren and flashing the lights to attract attention.
Disarming
the system turns off the protection, allowing normal use of the
vehicle.
There are two methods of Arming the security system:
1- The first method is to use the transmitter, by pressing and releasing its
“Arm/Lock” button. The system must not already be in Easy Valet Mode
(page 18)
, and the vehicle’s ignition switch must be off. Each press of
the “Arm/Lock” button arms the system, even if it is armed to begin with.
2- The second method is Last Door Arming, which configures the system to
automatically arm every time you exit the vehicle. This method of
arming is programmable, and may be used or not used as desired.
THE DOORS WILL LOCK*
To Arm the System:
Press & Release the “Arm/Lock” Button ( )
THE DOORS WILL LOCK*
THE PARKING LIGHTS
FLASH TWICE
TO CONFIRM
ARMING
THE SIREN CHIRPS TWICE
TO CONFIRM ARMING
REMOTE ARMING BY TRANSMITTER
Page 4
U
To Silently Arm the System:
Press & Release the “Auxiliary Output #2” Button ( II ) Twice
THE PARKING LIGHTS
WILL FLASH TWICE
Silent Arming and Silent Disarming are both operated
by double-pressing the same transmitter button.
2 X
* An optional doorlock interface must be installed
