![Omega Crime Guard 850i3 Скачать руководство пользователя страница 36](http://html1.mh-extra.com/html/omega/crime-guard-850i3/crime-guard-850i3_operation-manual_3929215036.webp)
Feature #24 1 Or 2 Button Arming / Disarming
(Factory Default Setting 2 Button Operation)
This feature changes the configuration of how the transmitter operates
the system. In the factory default setting of “2 Button Operation” setting, one
of the transmitter’s buttons will only Arm the system (the “Arm/Lock”
button), and a second button will only disarm the system (the “Disarm/
Unlock” button). When this feature is programmed to the “1 Button
Operation”, a single transmitter button alternates Arming and Disarming the
system with every press of that button. Optional transmitters with three
buttons, Omega part numbers #119-05R (woodgrain finish) and #119-05B
(polished ebony finish), are available from your Crime Guard dealer or
directly from Omega Research and Development. The pages 44-45 will
show the system’s operation if configured to operate with these transmitters.
Programming Transmitter 1 or 2 Button Operation:
Follow Steps 1 to 4 on page 24; at Step 4 the Valet Switch will be pressed
and released twenty four times. The system’s response will be twenty four
siren chirps, and the Status Light flashing twenty four times, pausing, then
repeating. Within 10 seconds, press and release the transmitter’s "Arm/
Lock" button to configure the system for “1 Button Operation” (the siren will
chirp once) or the "Disarm/Unlock" button to configure the system for “2
Button Operation” (the siren will chirp twice).
Page 36
Feature #25 Remote Start Run Time 10 Or 20 Minutes
(Factory Default Setting
10 Minutes
)
This Feature sets the period of time that the engine will run after being
remotely started. If the engine is not stopped by transmitter or a safety circuit
violation, the engine will automatically stop upon the expiration of the
selected time period.
Programming 10 or 20 Minute Run Time:
Follow Steps 1 to 4 on page 24; at Step 4 the Valet Switch will be pressed
and released twenty five times. The system’s response will be twenty five
siren chirps, and the Status Light flashing twenty five times, pausing, then
repeating. Within 10 seconds, press and release the transmitter’s "Arm/
Lock" button to configure the system for 20 minute remote start engine run
time (the siren will chirp once) or the "Disarm/Unlock" button to configure
the system for 10 minute run time (the siren will chirp twice).