Page 37
Feature #26 Steady/Flashing Lights During Remote Start
(Factory Default Setting
Steady
)
This Feature configures the system's operation of the vehicle’s parking lights
when the engine is running after it has been remotely started. The factory
default setting has the parking lights illuminating steady during the engine
run time; the feature’s other position flashes the parking lights on and off
during the engine run time.
Programming Steady or Flashing Parking Lights:
Follow Steps 1 to 4 on page 24; at Step 4 the Valet Switch will be pressed
and released twenty six times. The system’s response will be twenty six siren
chirps, and the Status Light flashing twenty six times, pausing, then repeat-
ing. Within 10 seconds, press and release the transmitter’s "Arm/Lock"
button to configure the system for steady parking lights (the siren will chirp
once) or the "Disarm/Unlock" button to configure the system for flashing
parking lights (the siren will chirp twice).
Feature #27
Gasoline Or Diesel Engine
(Factory Default Setting
Gasoline
)
This Feature changes the system's timing of the ignition and starter output
sequence for remotely starting vehicles with a diesel engine.
Programming Gasoline or Diesel Engine:
Follow Steps 1 to 4 on page 24; at Step 4 the Valet Switch will be pressed
and released twenty seven times. The system’s response will be twenty
seven siren chirps, and the Status Light flashing twenty seven times, pausing,
then repeating. Within 10 seconds, press and release the transmitter’s "Arm/
Lock" button to configure the system for gasoline engines (the siren will
chirp once) or the "Disarm/Unlock" button to configure the system for diesel
engines (the siren will chirp twice).
Feature #28
Extended Starter Cranking Time
(Factory Default Setting
Minimum
)
This feature operates in conjunction with the next feature’s “Tachless”
setting. The Crime Guard 850i
3
’s processor is capable of detecting the
running engine by two separate methods- the use of the “tach” wire for a
direct engine RPM input, or by monitoring the fluctuating voltage levels
associated with the starting process. When neither of these inputs are
