Notes
:
-
There is no time limitation for the second pressing of the “Disarm/Un-
lock” button. Once the button is pressed and released to Disarm the
system, every subsequent pressing of the “Disarm/Unlock” button will
produce the “unlock all doors” output, the single siren chirp and parking
and dome light illumination period. When the system is next armed, by
any of the three methods, the operation is reset so the next use of the
“Disarm/Unlock” button will result in the system Disarming and pro-
ducing the “unlock driver’s door only” output.
-
When disarming a system configured for Driver’s Door Priority, the user
has the option of Silent Disarming (by pressing twice the Auxiliary Out-
put #2 button), and then pressing the “Unlock/Disarm” button. When
the remaining doors unlock, the system will chirp the siren once.
Emergency Override:
In the event that your transmitter is lost, damaged, or its batteries have
become exhausted, the Valet Switch and the vehicle’s ignition key may be
used to disarm the system.
To Disarm the System without using a Transmitter:
Step 1. With the system in the armed condition, enter the vehicle via the
driver's door (be aware that the system will activate to an alarm
condition when the door is opened).
Step 2. Using the ignition key, turn the vehicle’s ignition on.
Step 3. Within 5 seconds, press and release the Valet Switch once. The
system will disarm.
DISARMING BY EMERGENCY OVERRIDE
ENTER THE VEHICLE
AND USE YOUR KEY TO
TURN THE IGNITION ON
WITHIN 5
SECONDS OF
TURNING THE
IGNITION ON,
PRESS AND RELEASE
THE VALET SWITCH
THE SYSTEM WILL DISARM
A procedure which separate, but similar, to an Emergency Override is the
Easy Valet mode (page 18), which prevents the system from performing any
automatic arming operations which may be programmed to occur.
Page 11
