Page 40
As explained at the beginning of this Operations Guide, your Crime
Guard system is capable of being operated by as many as four transmitters.
When adding or deleting transmitter codes to operate the security system,
follow this process:
1) Turn "on" the ignition.
2) Within 5 seconds of turning "on" the ignition, press the Valet Switch 5
times. The siren will chirp, confirming that for the next 10 seconds the
system is ready to learn a transmitter code. When the first transmitter
code is learned all existing stored codes will be erased. To enter a
transmitter code, simply press and release the “Arm/Lock” button (the
upper left button with the “locked padlock” graphic).
3) Repeat this procedure for each transmitter desired to operate the security
system. The system will chirp the siren once to confirm that each
transmitter code was learned. All of the other transmitter button's
functions will automatically be learned when the “Arm/Lock” button is
learned. If a code is not received within a 10 second period, the learning
process will automatically terminate.
Although this security system is programmed at the factory for the Arm/
Lock transmitter button to arm, and the Disarm/Unlock button to disarm the
system, any one of the transmitter's three buttons may be programmed to arm
the security system, with the other operations being assigned as follows:
PROGRAMMING TRANSMITTERS
Arm Disarm Auxiliary Output #2 Auxiliary Output #3
Arm/Lock
Disarm/Unlock
II
III
Disarm/Unlock Arm/Lock
II
III
II
Arm/Lock Disarm/Unlock
III
III Arm/Lock Disarm/Unlock
II
Only this
button is
pressed when
programming.
Please note that programming a transmitter to the system will activate the
audible ATV
TM
Warning and the extended Status Indicator Light visual
display; these will remain active for 48 hours after transmitter programming.
