Olympus VISERA ELITE CLV-S190, Инструкция по эксплуатации

Страница: 89 / 112

7.1 Care
83
CLV-S190 INSTRUCTION MANUAL
Ch.7
Chapter 7 Care, Storage, and Disposal
WARNING
• After wiping with a piece of moistened lint-free cloth, dry the light source thoroughly
before using it again. If it is used while still wet, there is a risk of an electric shock.
• When cleaning the light source, always wear appropriate personal protection
equipment, such as eye wear, face mask, moisture-resistant clothing, and
chemical-resistant gloves. Blood, mucus, and other potentially infectious material
adhering to the light source could pose an infection control risk. Also, chemical
agents may have harmful effects on the human body.
• Do not apply spray-type medical agents, such as rubbing alcohol directly to the light
source. Medical agents might enter the light source through the ventilation grills
and may cause equipment damage.
CAUTION
• Do not clean the output socket, other connectors, or the AC power inlet. Cleaning
them can deform or corrode the contacts resulting in damage to the light source.
• Do not immerse, autoclave, or gas sterilize the light source. These methods will
damage it.
• Do not wipe the external surface with a hard or abrasive wiping material. The
surface will be scratched.
If the light source is soiled, perform the following cleaning procedure immediately after use. If cleaning
is delayed, residual organic debris will begin to solidify, and it may be difficult to effectively clean the
light source. The light source should also be cleaned routinely.
7.1 Care